Red dye and carpets do not go that well. Even if your carpet is slightly red in color, the red stain is surely going to stand out on the surface. And purchasing a whole new carpet for a little bit of stain would not really be a wise choice.
That being said, there are plenty of ways to get that stain out. But if you do not know how to get red dye out of carpet easily and effectively, you would be looking at hours of work and might even end up having no proper result.
Well, as you have stumbled upon that article. There will be no need to worry about that anymore. We are going to offer a guide that will be easy to follow and will provide effective results in the end.
How to Easily Get Red Dye Out of Carpet?
When it comes to effectively getting rid of the red dye from the carpet, there is really no need to go through an intricate process. Instead, refer to these easy-to-follow steps, and the carpet should end up looking like nothing ever happened to it:
Step 1: Identify the Dye
The dye can be from different sources. And the most common thing that people drop on the carpet is red nail polish. However, cases of bloodstains, ink, and lipstick stains are not that uncommon.
Nonetheless, the first thing that you need to do is identify the source of the stain. You are going to need different types of cleaning solutions for different types of stains. And once you have identified the dye stain, move along to the next step.
Step 2: Get the Required Materials
Now, you have to work on getting the required materials. As we have mentioned above, different types of stains are going to require different types of cleaning solutions. That means there is no universal material list for all of the stains. But there are some common materials that you can use for all types of stains. They are:
Apart from these, you would need materials for preparing the cleaning solutions. And here is the list of cleaning solutions that you will need for each type of stain:
Step 3: Apply the Cleaning Solution and Work with the Stain
After gathering the required materials, you would have to move along to apply the cleaning solution and start to remove the stain. And the process for each of the stains is as given below:
First, make a clear solution by mixing water and ammonia. Here, the amount of ammonia will depend on how bad the stain actually is. If the stain is too deep into the fibers, you would have to use a good amount of ammonia to strengthen the power of the solution.
Then pour the entire solution into a spraying bottle and spray the liquid on the stain. Leave it for at least half an hour. You might have to go for the second round of spraying if there is no progress on the stain. But be careful not to soak the whole carpet to the backing. That will make the stain worse.
Here, you would have to make a solution using ¼ cup of hydrogen peroxide. Mix about 1 tbsp of ammonia with that solution. The ammonia works like a charm in terms of removing red dye stains off different surfaces.
Nevertheless, after the solution is done mixing, apply it to the region and let the fabric absorb it for the entire night. In the morning, the stains should be loose enough that they would go away with a simple rinse. Also, after rinsing, pat and dry the entire region.
For lipstick, you would require a bar of ivory soap. Dampen the cleaning cloth with some water and rub the bar of soap on the cloth. Use that cloth to dab on the stain. Do not scrub that much, or else the stain might just spread around and might stain the surrounding area. Then, rinse the area using a clean washing cloth.
Once you are done with removing the lipstick stain, use petroleum jelly. That will absorb any of the remaining stains. Get a dull knife and scrape away the dried off petroleum jelly.
In the case of ink, get some hairspray and spray a generous amount of it onto the region where the stain is. After that, you would have to dab the area with a bit of rubbing alcohol. Scrub the entire area using a soft toothbrush. Dip the toothbrush in a mixture of dishwashing soap and warm water while scrubbing.
You would have to dab away all the dissolved ink when scrubbing. And after the ink is all gone, rinse the area and pat it dry.
Step 4: The Finishing Touches
After the stain is getting a bit loose or totally off the surface, mix a bit of dishwashing soap with lukewarm water. And then dampen a highly absorbent cloth with that solution. Place this damp cloth on the area and weigh it down with the iron. Make sure that you set the temperature to low and wait for about 15 minutes.
If you do not see any improvement on the stain, you might have to repeat the process. But once the stain is off the surface, rinse it a bit and let it dry. And you should end up with a carpet that does not have any sort of red stain or color on the surface.
While using any of the chemical solutions on the carpet, do check for the colorfastness of the inconspicuous area. And we did use chemicals for the process we described above. There will be no need to keep this thing in mind if you are using a mild soap.
Apart from that, when you are scrubbing the stain, do make sure that you are applying too much pressure. Upon application of excess pressure, the fibers can get damaged. And that would lower the overall lifespan of the area, and it can degrade the overall looks of the carpet, which you would not want, right?
You might not have any rubbing alcohol or hairspray available. In that case, you can use vodka. It is an excellent substitute for those. However, you rinse the carpet thoroughly after finishing off the cleaning process. The chemical residues can attract dirt, dust, and other types of stains.
Now that you know how to get red dye out of carpet easily and effectively, worrying too much when there is a red stain on the carpet will not be a requirement anymore. Just follow the steps properly, and the carpet should be good as new.