How to Clean Bissell Carpet Cleaner Easily

How to Clean Bissell Carpet Cleaner Easily?

It goes without saying that the Bissell carpet cleaner is a great tool. But that performance will not stay the same if you do not take proper care of it. In fact, the device might end up being non-functional without any maintenance.

Well, maintenance tasks might seem like a tiresome thing. And it surely can be a tedious task for the Bissell carpet cleaner. But if you know how to clean bissell carpet cleaner easily, there will be no need to spend that much time or effort on the maintenance task.

However, even the process that is on the manual might seem intricate to some. That is where our guide steps in. It is easy to follow and simple enough that the maintenance task will feel like a piece of cake for you!

Steps to Follow to Clean Bissell Carpet Cleaner

There are three types of carpet cleaner, and we will provide the steps for all of them. So, without wasting any more of your time, let us get started!

Bissell Carpet Cleaner

For Upright Cleaner

Here are the steps that you would need to follow in cleaning the Bissell upright carpet cleaner:

For Upright Cleaner

Step 1: Flush the machine

First of all, you would have to flush the machine. Fill it up with some hot water and switch the cleaning mode to “high traffic.” Adjust the handle into the reclining position and move the device back and forth on a surface. Press the spray trigger while moving the machine. We recommend pressing it for at least 15 seconds.

After that, let go of the trigger and then press it again for another 15 seconds. Move the machine back and forth while pressing the trigger. Release the trigger and then vacuum. While vacuuming, do not spray up until the device stops sucking the water.

Step 2: Wash out the Hose

To wash out the hose, you would have to make it suck clean water. Use a bowl or use the faucet directly to clean the house. After finishing the suction, lift up the pipe by the very end and stretch it. That will clear out any of the water that might be inside the line.

Wash out the Hose

Step 3: Clean the Tank 

Turn the machine off using the power switch and unplug it from the power outlet. After that, wrap the power cord properly to keep it secure. Take out of the tank and rinse. Make sure that you use hot water to rinse it. Also, do ensure that the water is reaching around the bladder and underneath the tank.

Finally, rinse away any of the debris that might be inside the red filter. Then finish it off by cleaning the nozzle area.

Step 4: Clean the Nozzle 

After taking care of the tank, move along to the nozzle. Here, you would have to take off the water tank and remove the nozzle as well. Rinse it using some hot water and clean the fluid connection area. Use a small paperclip to clean the nozzle area properly. Clean out the locking keys and place the nozzle back in place.

Step 5: Maintain the Brush Roll

Now, you would have to remove the debris from the brush roll. Pull any of the debris and har that you can from the roll. Turn it around and make sure that it spins freely. If it does not, you might have to apply some grease or check for things that are adding friction to the bearing.

Brush Roll

For Portable Carpet Cleaner

The steps that you would need to follow to clean out the Bissell portable carpet cleaner are as follows:

Bissell Portable Carpet Cleaner

Step 1: Rinse out the Hose

Like the upright cleaner, you would have to clean the hose first. Fill a bowl with clean water, and use the device to suck it all up. And then, you would have to let it drain. Repeat the process until the water comes out clean.

Step 2: Clean the Tank

First, turn the machine off and unplug the power cord. Lift out the tank and empty it on the dustbin. Once there is no debris or any other thing inside the tank, rinse it by running it under the sink. You might want to use hot water because that will offer an effective result.

Clean the Tank

Step 3: Rinse the Float Stack

Some of the models will have a floating stack. This stack will be inside the tank. You would have to first remove it by rotating it counter-clockwise and rinse it under the water. Put it back into place after cleaning it.

Step 4: Wash the Cleaning Tool

After dealing with the float stack, work with the cleaning tool. Release it from the spray trigger and use running water to rinse it. Clean any of the dirt and debris that are stuck on the nozzle as well.

For Canister Carpet Cleaner

If you have a Bissell canister carpet cleaner, the steps that would have to follow in cleaning it are:

Bissell Canister Carpet Cleaner

Step 1: Empty and Clean the Tank

First of all, turn the machine off and empty out the tank. Then, take it around and rinse it by taking it under running water. Do make sure that you clean it thoroughly. Then, dry it properly and place it back.

Step 2: Wash the Inner Parts

Here, you would have to remove the water filtration tower first. Then, take out the hose and the mode selector. Clean all of them by holding them under running water and clear out as much of the debris and dust as possible. Do make sure that they are properly dried before reinstalling them.

Bissell Canister Carpet Cleaner

Step 3: Rinse the Filter

The canister machine should have a filter. For cleaning it, you need first to check if there is any visible dirt on the surface. If you find any, take the filter out, rinse it with water. Like always, do ensure that the filter is dry and then place it back into place.

Final Words

Without knowing how to clean Bissell carpet cleaner easily, you would be putting too much effort and time into the maintaining process. And the process can get harder than it has to be. But now that you know the easy process, hopefully, you will not have to worry too much when it comes to maintaining the cleaner.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top